Suitable for grease or oil lubrication and all kinds of movement, good load capacity,... more
Product information "POM – MET® Thrust washer POA"
Suitable for grease or oil lubrication and all kinds of movement, good load capacity, robust and insensible to dirt.
POM-MET is a low-maintenance composite sliding bearing with a POM coating. Initial lubrication is required. Both oil or grease lubrication are possible. Due to the lubricant pockets, relubrication intervals are significantly reduced! Suitable for all sliding movements, good load capacity, robust and resistant to dirt.
Materials
Support material/Carrier material | Tin-plated steel (1.0330) |
Intermediate layer | Sintered bronze |
Sliding Layer | Acetal resin / POM |
Product Properties
Maintenance | low maintenance |
Static load | ≤ 250 N/mm² |
Dynamic load | ≤ 140 N/mm² |
Sliding speed | ≤ 2,5 m/s |
Friction value | 0,04 to 0,12 µ |
Temperature strain | –40 bis +130 °C |
max. pv-value | 2,8 N/mm² x m/s |
Tolerance details
Housing ø | H7 |
Bushing inner ø after mounting | D9 to D10 |
Shaft tolerance | h8 |
Shaft material
Material | Steel, hardened or untempered, surface roughness ≤ Rz 4 - 6 |
Mounting advice
Housing | Installation chamfer, approx.1,5 mm x 15 to 45° |
Shaft | Installation chamfer, 5 mm x 15°, edges rounded. |
Installation mandrel | For assembly, we suggest to use an adequate fitting mandrel. Grease lubrication of the outer surface may be necessary when mounting. |
Glue | The adhesive should not touch the sliding surface. |
Related links to "POM – MET® Thrust washer POA"
Hint!
Viewed