...not in stock
- Shop number: BMA_L.10_1
BRO-MET®/L is is basically the same kind of bushing as BRO-MET®. The only difference is that the L version has complete holes for the storage of the grease, instead of the diamond shaped pockets of the BRO-MET® version. The holes have the advantage of storing more lubricants than the pockets and therefore, the maintenance intervals can be extended.
Another advantage is that the greasing holes of the BRO-MET®/L material is also able to store grease for a much longer time during the bearing’s lifespan. As the pockets of the standard BRO-MET® version are about 0.5mm deep, the holes go through the complete wall thickness of the bushing. Once the bushing starts to wear, the storage capacity of the standard BRO-MET®becomes comparatively lesser than for the L version.
As such, BRO-MET®/L can guarantee a more sufficient lubrication for a longer period during the life time of the bushing.
The applications for BRO-MET®/L are basically the same as for the standard version. Both materials can easily be exchanged for one another.
BRO-MET®/L can also be manufactured with seals for an extended bearing life, as seals help to keep harmful abrasive particles out of the bushing and contain the grease inside the bsuing.
|Sliding surface:||CuSn8P (DIN 17662)|
|Support material:||CuSn8P (DIN 17662)|
|Dynamic load:||≤ 40 N/mm²|
|Static load:||≤ 120 N/mm²|
|Sliding speed:||≤ 2,5 m/s|
|Fricition value:||0,05 - 0,20 µ|
|max. PV-value:||2,8 N/mm² x m/s|
|Temperature strain:||-40 up to +250 °C|
|Shaft material:||Steel, hardened or untempered, roughness Rz ≤ 6,3|